The First One‐Pot Synthesis of Metal–Organic Frameworks Functionalised with Two Transition‐Metal Complexes

The synthesis of a metal–organic framework (UiO‐67) functionalised simultaneously with two different transition metal complexes (Ir and Pd or Rh) through a one‐pot procedure is reported for the first time. This has been achieved by an iterative modification of the synthesis parameters combined with characterisation of the resulting materials using different techniques, including X‐ray absorption spectroscopy (XAS). The method also allows the first synthesis of UiO‐67 with a very wide range of loadings (from 4 to 43 mol %) of an iridium complex ([IrCp*(bpydc)(Cl)Cl]^2?; bpydc=2,2′‐bipyridine‐5,5′‐dicarboxylate, Cp*=pentamethylcyclopentadienyl) through a pre‐functionalisation methodology.     

CuFe2O4 magnetic heterogeneous nanocatalyst: Low power sonochemical-coprecipitation preparation and applications in synthesis of 4H-chromene-3-carbonitrile scaffolds

The paper presents the synthesis and catalytic activity of CuFe₂O₄ nanoparticles. The CuFe₂O₄ nanoparticles have been prepared by sonochemical route under low power ultrasonic irradiation (UI) and using silent stirring at room temperature only (ST) along with co-precipitation method, without using any additive/capping agent. The synthesized magnetic nanoparticles were successfully used and compared for the synthesis of 4H-chromene-3-carbonitrile derivatives. The CuFe₂O₄ nanoparticles obtained by sonochemical route exhibit higher catalytic activity because of small size (0.5–5 nm), high surface area (214.55 m²/g), high thermal stability up to 700 °C, recyclability and reusability due to its magnetic characteristics than CuFe₂O₄ nanoparticles obtained by room temperature silent stirring. The synthesized CuFe₂O₄ nanoparticles were characterized by FT-IR, SEM–EDX, HR-TEM, XRD, TGA/DTA/DTG, BET, VSM techniques. The present method is of great interest due to its salient features such as environmentally compatible, efficient, short reaction time, chemoselectivity, high yield, cheap, moisture insensitive, green and recyclable catalyst which make it sustainable protocol.     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

Influence of Polarity and Activation Energy in Microwave–Assisted Organic Synthesis (MAOS)

The aim of this work was to determine the parameters that have decisive roles in microwave-assisted reactions and to develop a model, using computational chemistry, to predict a priori the type of reactions that can be improved under microwaves. For this purpose, a computational study was carried out on a variety of reactions, which have been reported to be improved under microwave irradiation. This comprises six types of reactions. The outcomes obtained in this study indicate that the most influential parameters are activation energy, enthalpy, and the polarity of all the species that participate. In addition to this, in most cases, slower reacting systems observe a much greater improvement under microwave irradiation. Furthermore, for these reactions, the presence of a polar component in the reaction (solvent, reagent, susceptor, etc.) is necessary for strong coupling with the electromagnetic radiation. We also quantified that an activation energy of 20–30 kcal mol⁻¹ and a polarity (μ) between 7–20 D of the species involved in the process is required to obtain significant improvements under microwave irradiation.     

Metal-free phthalocyanine single crystal: Solvothermal synthesis and near-infrared electroluminescence

A metal-free purple H₂Pc single crystal was synthesized by a facile solvothermal method, and its solubility and near-infrared (NIR) optical properties were also investigated due to its potential applications as a light-emitting layer for OLEDs. The H₂Pc single crystal is insoluble in 1-chlorine naphthalene and other organic solvents. It gives a wide absorption in the range from 620 nm to 679 nm and a wide emission in near 922 nm. As an active light-emitting layer, H₂Pc was employed to fabricate electroluminescent (EL) devices with a structure of ITO/NPB (30 nm)/Alq₃:H₂Pc (30 nm)/BCP (20 nm)/Alq₃ (20 nm)/Al. The emission center is at 936 nm when the H₂Pc doping concentration is 20 wt%. The doping concentration strongly governs the emission intensity. When doping concentration decreases from 10 wt% to 1 wt%, the emission intensity remarkably fades, and simultaneously the emission center undergoes a blue shift.     

New Penta(tetrathiafulvalenyl)[60]fullerenes for Supramolecular Materials

New penta(organo)fullerenes donor–acceptor systems bearing five tetrathiafulvalene recognition units have been synthesized to promote self‐assemblies similar in appearance to shuttlecocks nested into each other thanks to the conical host cavity created around the fullerene together with the π–π and electronic interactions.     

Total Synthesis and Structure Elucidation of JBIR‐39: A Linear Hexapeptide Possessing Piperazic Acid and γ‐Hydroxypiperazic Acid Residues

The total synthesis and stereochemical structural elucidation of JBIR‐39, containing four nonproteinogenic piperazic acid (Piz) residues, is reported. The synthesis includes Sc(OTf)₃‐catalyzed acylation of a Piz(γ‐OTBS) derivative with piperazic acid chloride, providing the desired Piz‐Piz(γ‐OTBS) dipeptide in high yield without epimerization. After assembling two additional Piz moieties and (S)‐isoleucic acid at the N‐terminus, amidation with the (R)‐α‐methylserine ester at the C‐terminus, and deprotection afforded the desired (2R,8S)‐hexapeptide, which is the assumed structure of JBIR‐39. Although the spectral data of the (2R,8S)‐hexapeptide was not identical to JBIR‐39, further synthesis of three stereoisomers confirmed the stereochemical structure of JBIR‐39 to be (2S,6S,8S,11R,16S,21R,26S,27S).     

Enantioselective Template‐Directed [2+2] Photocycloadditions of Isoquinolones: Scope,Mechanism and Synthetic Applications

A strategy for the enantioselective [2+2] photocycloaddition of isoquinolones with alkenes is presented, in which the formation of a supramolecular complex between a chiral template and the substrate ensures high enantioface differentiation by shielding one face of the substrate. Fifteen different electron‐deficient alkenes and ten different substituted isoquinolones undergo efficient photocycloaddition, yielding the cyclobutane products in excellent yields and with outstanding regio‐, diastereo‐ and enantioselectivities (up to 99 % ee). The mechanism of the reaction is investigated by means of triplet sensitization/quenching and radical clock experiments, the results of which are consistent with the involvement of a triplet excited state and a 1,4‐biradical intermediate. The variety of functionalized cyclobutanes obtained using this approach can be further increased by straightforward synthetic transformations of the photoadducts, allowing rapid access to libraries of compounds for various applications.     

Triggering the Directional Selectivity of a Ring‐Closure Reaction Leads to Pyridoazacarbazoles with Anticancer Properties

We herein describe a facile and versatile synthetic route to the tetracyclic system of 6‐substituted 5,6‐dihydro‐11H‐pyrido[3,2‐i]‐1‐azacarbazoles with promising anticancer properties. These derivatives are built up by an elegant one‐step base‐catalyzed synthetic procedure from commercially available building blocks. One additional step provides the corresponding skeleton hitherto unknown in the literature. The possibility to synthesize a large library of compounds with various substitution patterns utilizing this method underlines the importance of this synthetic procedure.     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913